Add cyb2.yml

cyb2.yml

@@ -0,0 +1,347 @@
+esphome:
+  name: cyb2
+  friendly_name: cyb2
+
+esp32:
+  board: esp32dev
+  framework:
+    #type: arduino
+    type: esp-idf
+    
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+  encryption:
+    key: "j7XV9IcJRYR2ZmJCIwezbLl7xoF5cwhUB9LICXMwSvg="
+  services:
+    - service: play_rtttl
+      variables:
+        song_str: string
+      then:
+        - rtttl.play:
+            rtttl: !lambda 'return song_str;'
+
+ota:
+  - platform: esphome
+    password: "dc303f89c909e0defe058ed4b0a03061"
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  #ap:
+  #  ssid: "Cyb2 Fallback Hotspot"
+  #  password: "HEbDg1Ra9OzC"
+
+#captive_portal:
+
+# ============================================================ 
+# ESPHome Display related setup
+#
+# Create a font to use, add and remove glyphs as needed. 
+font:
+  - file: 'fonts/Arimo-Regular.ttf'
+    id: arimo20
+    size: 20
+    glyphs: "!\"%()+=,-_.:°0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZÅÄÖ abcdefghijklmnopqrstuvwxyzåäö"
+
+# Create a Home Assistant blue color
+color:
+  - id: ha_blue
+    hex: 51c0f2
+
+# ============================================================ 
+# Home Assistant related setup
+#
+light:
+  - platform: monochromatic
+    output: backlight_pwm
+    name: Display Backlight
+    id: backlight
+    restore_mode: ALWAYS_ON
+    #on_state:
+    #  - lvgl.slider.update:
+    #      id: backlight_slider
+    #      value: !lambda return x;
+
+
+# ============================================================ 
+# Hardware related setup
+#
+# Setup SPI for the display. The ESP32-2432S028R uses separate SPI buses for display and touch
+spi:
+  - id: tft
+    clk_pin: GPIO14
+    mosi_pin: GPIO13
+    miso_pin: GPIO12
+  - id: touch
+    clk_pin: GPIO25
+    mosi_pin: GPIO32
+    miso_pin: GPIO39
+
+# Setup a pin to control the backlight
+output:
+  - platform: ledc
+    pin: GPIO21
+    id: backlight_pwm
+  - platform: ledc
+    pin: GPIO26
+    id: rtttl_out
+
+# Setup the ili9xxx platform
+#
+# Display is used as 240x320 by default so we rotate it to 90°
+display:
+ - platform: ili9xxx
+   id: esp_display
+   model: ili9342
+   spi_id: tft
+   cs_pin: GPIO15
+   dc_pin: GPIO2
+   #invert_display: true (changed to below with ESPhome 2023.12.0)
+   invert_colors: false
+   rotation: 90
+
+
+# Set up the xpt2046 touch platform
+touchscreen:
+  platform: xpt2046
+  spi_id: touch
+  cs_pin: GPIO33
+  interrupt_pin: GPIO36
+  update_interval: 50ms
+  threshold: 400
+  calibration:
+    x_max: 3860
+    x_min: 280
+    y_min: 340
+    y_max: 3860
+  transform:
+    #swap_xy: true      
+    mirror_x: true
+    #mirror_y: true
+lvgl:
+  buffer_size: 25%
+  pages:
+  - id: simon
+    widgets:
+      - label:
+          x: 0
+          y: 10
+          width: 240
+          height: 50
+          text_align: CENTER
+          id: lbl_msg
+          text_font: montserrat_20
+          text: "HELLO"
+      - led:
+          id: lvgl_led
+          x: 210
+          y: 10
+          #color: 0x0000FF
+          brightness: 70%
+      - buttonmatrix:
+          x: 0
+          y: 50
+          width: 240
+          height: 270
+          id: lvgl_keypad
+          rows:
+            - buttons:
+              - id: btn_1
+                text: "1"
+              - id: btn_2
+                text: "2"
+              - id: btn_3
+                text: "3"
+              #height: 100
+            - buttons:
+              - id: btn_4
+                text: "4"
+              - id: btn_5
+                text: "5"
+              - id: btn_6
+                text: "6"
+            - buttons:
+              - id: btn_7
+                text: "7"
+              - id: btn_8
+                text: "8"
+              - id: btn_9
+                text: "9"
+            - buttons:
+              - id: btn_a
+                text: "*"
+              - id: btn_0
+                text: "0"
+              - id: btn_b
+                text: "#"
+
+            #- buttons:
+             
+              #- id: btn_red
+              #  key_code: "r"
+              #  text: "Red"
+                #bg_color: 0xff0000
+              #- id: btn_green
+              #  key_code: "g"
+              #  text: "Green"
+                
+                #bg_color: 0x00ff00
+            #- buttons:
+            #  - id: btn_yellow
+            #    key_code: "y"
+            #    text: "yellow"
+                
+            #  - id: btn_blue
+            #    key_code: "b"
+            #    text: "blue"
+                
+                #bg_color: 0x0000ff
+  - id: main_page
+    widgets:
+      - slider:
+          id: backlight_slider
+          x: 20
+          y: 50
+          width: 30
+          height: 100
+          pad_all: 8
+          min_value: 0
+          max_value: 255
+          on_release:
+            then:
+            - light.turn_on:
+                id: backlight
+                brightness: !lambda |-
+                  return int(x) / 255.0;
+
+
+text:
+  - platform: lvgl
+    widget: lbl_msg
+    name: "Message"
+    mode: TEXT
+
+key_collector:
+  - source_id: lvgl_keypad
+    min_length: 4
+    max_length: 20
+    end_keys: "#"
+    end_key_required: true
+    back_keys: "*"
+    allowed_keys: "0123456789*#"
+    timeout: 5s
+    on_progress:
+      - if:
+          condition:
+            lambda: return (0 != x.compare(std::string{""}));
+          then:
+            - lvgl.label.update:
+                id: lbl_msg
+                text: !lambda 'return x.c_str();'
+          else:
+            - lvgl.label.update:
+                id: lbl_msg
+                text: "ENTER CODE"
+    on_result:
+      - if:
+          condition:
+            lambda: return (0 == x.compare(std::string{"1234"}));
+          then:
+            - lvgl.led.update:
+                id: lvgl_led
+                color: 0x00FF00
+          else:
+            - lvgl.led.update:
+                id: lvgl_led
+                color: 0xFF0000
+
+binary_sensor:
+  - platform: lvgl
+    widget: btn_1
+    name: 1
+  - platform: lvgl
+    widget: btn_2
+    name: 2
+  - platform: lvgl
+    widget: btn_3
+    name: 3
+  - platform: lvgl
+    widget: btn_4
+    name: 4
+  - platform: lvgl
+    widget: btn_5
+    name: 5
+  - platform: lvgl
+    widget: btn_6
+    name: 6
+  - platform: lvgl
+    widget: btn_7
+    name: 7
+  - platform: lvgl
+    widget: btn_8
+    name: 8
+  - platform: lvgl
+    widget: btn_9
+    name: 9
+  - platform: lvgl
+    widget: btn_0
+    name: 0
+  - platform: lvgl
+    widget: btn_a
+    name: a
+  - platform: lvgl
+    widget: btn_b
+    name: b
+  
+
+#i2s_audio:
+ # - id: i2s_audio_bus
+  #  i2s_lrclk_pin: GPIO22
+    #i2s_bclk_pin: GPIO22
+
+#i2s_audio:
+#  i2s_lrclk_pin: GPIO26
+  #i2s_bclk_pin: GPIO26
+#media_player:
+#  - platform: i2s_audio
+#    name: ESPHome I2S Media Player
+#    dac_type: internal
+#    mode: left
+
+#i2s_audio:
+#  - id: i2s_audio_bus
+#    i2s_lrclk_pin: GPIO33
+ #   i2s_bclk_pin: GPIO19
+
+#speaker:
+#  - platform: i2s_audio
+#    id: cyb_speaker
+    #i2s_dout_pin: GPIO22
+#    sample_rate: 16000
+#    dac_type: internal
+#    bits_per_sample: 16bit
+#    mode: left
+    #channel: left
+#    buffer_duration: 50ms
+
+#media_player:
+#  - platform: speaker
+#    name: None
+#    id: echo_media_player
+#    announcement_pipeline:
+#      speaker: cyb_speaker
+#      sample_rate: 16000
+#      num_channels: 1
+#      format: WAV
+#    codec_support_enabled: false
+#    buffer_size: 4000
+
+rtttl:
+  output: rtttl_out
+  id: my_rtttl
+  gain: 10%