initial commit

esphome/cyb1.yaml

@@ -0,0 +1,134 @@
+esphome:
+  name: cyb1
+  friendly_name: cyb1
+
+esp32:
+  board: esp32dev
+  framework:
+    type: arduino
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+  encryption:
+    key: "W9XTb4Pds0pmbvnyDRSCOZrH7+r+9rOjg0hZmRK/uwo="
+
+ota:
+  - platform: esphome
+    password: "e6ca3cee32249ed15ee0bc06bce56375"
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  #ap:
+  #  ssid: "Cyb1 Fallback Hotspot"
+  #  password: "l0Vs6bxErB2F"
+
+#captive_portal:
+
+# ============================================================ 
+# ESPHome Display related setup
+#
+# Create a font to use, add and remove glyphs as needed. 
+font:
+  - file: 'fonts/Arimo-Regular.ttf'
+    id: arimo20
+    size: 20
+    glyphs: "!\"%()+=,-_.:°0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZÅÄÖ abcdefghijklmnopqrstuvwxyzåäö"
+
+# Create a Home Assistant blue color
+color:
+  - id: ha_blue
+    hex: 51c0f2
+
+# ============================================================ 
+# Home Assistant related setup
+#
+light:
+  - platform: monochromatic
+    output: backlight_pwm
+    name: Display Backlight
+    id: backlight
+    restore_mode: ALWAYS_ON
+    #on_state:
+    #  - lvgl.slider.update:
+    #      id: backlight_slider
+    #      value: !lambda return x;
+
+
+# ============================================================ 
+# Hardware related setup
+#
+# Setup SPI for the display. The ESP32-2432S028R uses separate SPI buses for display and touch
+spi:
+  - id: tft
+    clk_pin: GPIO14
+    mosi_pin: GPIO13
+    miso_pin: GPIO12
+  - id: touch
+    clk_pin: GPIO25
+    mosi_pin: GPIO32
+    miso_pin: GPIO39
+
+# Setup a pin to control the backlight
+output:
+  - platform: ledc
+    pin: GPIO21
+    id: backlight_pwm
+
+# Setup the ili9xxx platform
+#
+# Display is used as 240x320 by default so we rotate it to 90°
+display:
+ - platform: ili9xxx
+   id: esp_display
+   model: ili9342
+   spi_id: tft
+   cs_pin: GPIO15
+   dc_pin: GPIO2
+   #invert_display: true (changed to below with ESPhome 2023.12.0)
+   invert_colors: true
+
+
+# Set up the xpt2046 touch platform
+touchscreen:
+  platform: xpt2046
+  spi_id: touch
+  cs_pin: GPIO33
+  interrupt_pin: GPIO36
+  update_interval: 50ms
+  threshold: 400
+  calibration:
+    x_max: 3860
+    x_min: 280
+    y_min: 340
+    y_max: 3860
+  transform:
+    swap_xy: true      
+    mirror_x: true
+    mirror_y: true
+lvgl:
+  buffer_size: 25%
+  pages:
+      - id: main_page
+        widgets:
+          - slider:
+              id: backlight_slider
+              x: 20
+              y: 50
+              width: 30
+              height: 100
+              pad_all: 8
+              min_value: 0
+              max_value: 255
+              on_release:
+                then:
+                - light.turn_on:
+                    id: backlight
+                    brightness: !lambda |-
+                      return int(x) / 255.0;
+