esphome:
  name: cyb1
  friendly_name: cyb1

esp32:
  board: esp32dev
  framework:
    type: arduino

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "W9XTb4Pds0pmbvnyDRSCOZrH7+r+9rOjg0hZmRK/uwo="

ota:
  - platform: esphome
    password: "e6ca3cee32249ed15ee0bc06bce56375"

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  #ap:
  #  ssid: "Cyb1 Fallback Hotspot"
  #  password: "l0Vs6bxErB2F"

#captive_portal:

# ============================================================ 
# ESPHome Display related setup
#
# Create a font to use, add and remove glyphs as needed. 
font:
  - file: 'fonts/Arimo-Regular.ttf'
    id: arimo20
    size: 20
    glyphs: "!\"%()+=,-_.:°0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZÅÄÖ abcdefghijklmnopqrstuvwxyzåäö"

# Create a Home Assistant blue color
color:
  - id: ha_blue
    hex: 51c0f2

# ============================================================ 
# Home Assistant related setup
#
light:
  - platform: monochromatic
    output: backlight_pwm
    name: Display Backlight
    id: backlight
    restore_mode: ALWAYS_ON
    #on_state:
    #  - lvgl.slider.update:
    #      id: backlight_slider
    #      value: !lambda return x;


# ============================================================ 
# Hardware related setup
#
# Setup SPI for the display. The ESP32-2432S028R uses separate SPI buses for display and touch
spi:
  - id: tft
    clk_pin: GPIO14
    mosi_pin: GPIO13
    miso_pin: GPIO12
  - id: touch
    clk_pin: GPIO25
    mosi_pin: GPIO32
    miso_pin: GPIO39

# Setup a pin to control the backlight
output:
  - platform: ledc
    pin: GPIO21
    id: backlight_pwm

# Setup the ili9xxx platform
#
# Display is used as 240x320 by default so we rotate it to 90°
display:
 - platform: ili9xxx
   id: esp_display
   model: ili9342
   spi_id: tft
   cs_pin: GPIO15
   dc_pin: GPIO2
   #invert_display: true (changed to below with ESPhome 2023.12.0)
   invert_colors: true


# Set up the xpt2046 touch platform
touchscreen:
  platform: xpt2046
  spi_id: touch
  cs_pin: GPIO33
  interrupt_pin: GPIO36
  update_interval: 50ms
  threshold: 400
  calibration:
    x_max: 3860
    x_min: 280
    y_min: 340
    y_max: 3860
  transform:
    swap_xy: true      
    mirror_x: true
    mirror_y: true
lvgl:
  buffer_size: 25%
  pages:
      - id: main_page
        widgets:
          - slider:
              id: backlight_slider
              x: 20
              y: 50
              width: 30
              height: 100
              pad_all: 8
              min_value: 0
              max_value: 255
              on_release:
                then:
                - light.turn_on:
                    id: backlight
                    brightness: !lambda |-
                      return int(x) / 255.0;